ESP32 Conference Badge

TLDR: Just go to to the GitHub repo to grab the code and other related resources.
https://github.com/DigiTorus86/ESP32Badge

The “Badge My IoT Life” ESP32 Conference Badge used at CodeMash 2020 is a great little project for learning/practicing solder skills and rapidly prototyping microcontroller projects that require any of these common peripherals:

• Screen/display
• User input buttons
• SD card
• Speakers
• LEDs

Features

• Layout facilitates easy soldering.
• Designed so that key components can be removed and reused in other projects.
• Relatively large 262K color display
• WiFi and Bluetooth/BLE (Bluetooth Low
Energy) connectivity
• Lots of buttons for user input
• Can be powered from battery or USB
• Battery level detection circuit
• Digital audio/WAV file output to speaker
• Jumpers for Inter Integrated Circuits (I2C) bus and Universal Asynchronous Receive Transmit (UART)
• Can expect 6 to 8 hours of operation with a fresh, fully-charged battery.
• Includes a small kickstand 3D print design for holding the badge upright on your desk.

Limitations

• Fairly bulky compared to coin cell powered badges with e-Ink displays
• Don’t expect 60Hz display refresh (closer to 1Hz for full screen)
• Fairly quiet, low-fidelity sound from the button speaker/transducer.
• As of yet, does not have a full enclosure 3D print design, though there is a handy snap-in hanger for a lanyard.

Full list of materials and steps to build can be found on the GitHub repo, and the PCB can be ordered from PCBWay:
https://www.pcbway.com/project/shareproject/ESP32_Conference_Badge_v1_2.html